CRJ3255 Jaw Plant

Terex Cedarapids Crj3255 Jaw Crusher
Rent Now

Output Potential: 255-760 tph

Transport Dimensions: 51'6"x11'1"x13'5" (LxWxH) 

Working Dimensions: 51'6"x15'2"x14'10" (LxWxH)

Weight: 135,585 lbs

The Cedarapids CRJ3255 jaw plant combines the popular JW55 jaw crusher with the high stroke 52”x20’ vibrating grizzly feeder making this plant a high production portable crushing machine. This quarry duty JW55 crusher, with its large 32”x55” opening, long jaws, and aggressive stroke, is in a class by itself in a portable crushing plant. Besides high production, the crusher has a modern hydraulic wedge adjustment and tension rod system making adjustments quick and safe. The action of the large stroke feeder provides high feed rates along with efficient fines separation on the grizzly section. The wide belt conveyor has large clearance below the crusher and is a straight line design without curves so the belt can maintain maximum tension, minimizing drive slippage. The conveyor also has a heavy duty shock absorbing impact bed under the jaw and continuously supported side flashing along its diverging hopper to minimize spillage and maintenance. Multiple options are available so customers can configure the CRJ3255 plant to their specific needs.
  • Tool-less hydraulic wedge jaw adjustment for quick safe adjustment
  • Hydraulic tension rod automatically adjusts tension
  • Electric/hydraulic adjust unit
  • Quick change jaw die wedge system
  • Side access to stationary die wedges
  • High strength frame
  • Four-piece bolted and dowelled construction
  • Bolted 3-piece side cheek plates for easy replacement
  • Alternate axle configuration - 3 axle spring suspension - 4 axle with extended wheelbase - 4 axle with extended wheelbase and 67” spacing - 3+1 spring suspension (tag and single pivot frame)
  • Diesel generator powered
  • Removable electrical switchgear panel, wiring and operator push-button station, hydraulic panel lift system
  • Tethered or wireless remote feeder control
  • Hydraulic feeder module lift system, no crane required to remove feeder module
  • Hinged, 12’2” (3708mm) or 15’7” (4750mm) wide hopper wings with manual or hydraulic operation and ground access locking supports
  • Grizzly reject cross conveyor
  • Various grizzly bar spacing
  • Extended length undercrusher conveyor with hydraulic fold
  • Dust suppression water spray system
  • Cross belt self-cleaning magnet
  • Hydraulic leveling or run-on jacks (gas, 12V, or 24V in hinged enclosure) in place of crank landing jacks
  • Hydraulic conveyor tail lift
  • Oversize 315/80 R22.5 tires
  • 24’ feeder in place of 20’ feeder