2026 Powerscreen Trakpactor 320SR Impact Crusher

(For prices refer to your dealer)
• High Chrome hammers. (Only for use when no steel
in feed)
• Grinding path (not suitable for demolition
applications) fitted in the lower position and lined
with wear resistant impact plates on the upper
section, and reversible manganese impact bars on
the lower section. When fitted greater control on the
product size is achieved together with improved
product shape.
• Overband magnetic separator.
• Side/dirt conveyor.
• Radio remote control.

• Crusher type: 428 Fixed Hammer Impactor.
• Feed opening: 1067mm x 711mm.
• Rotor Width: 1066 mm
• Rotor Diameter: 1066 mm (Over Hammers).
• Crusher frame: Fabricated from steel plate and fitted with replaceable liner plates.
• Rotor: Runs in two heavy-duty spherical self aligning roller bearings and is fitted with four reversible and replaceable fixed blow bars.

• Blowbars: Two full size and two half size high manganese blow bars are fitted as standard.
• Impact aprons: Fitted in upper and middle positions and lined with wear resistant impact plates.
• Drive: Through wedge belts with screw tension adjustment on engine.
• Engine pulley: Machines built for stock are fitted with the standard speed pulley (suitable for quarry applications). The slower crusher pulley is supplied loose.
• Maximum feed size: 400mm3 depending on type of blow bar and material being processed.
• Impactor speeds: Slow 504 rpm (224mm diameter) Std. 630 rpm (280mm diameter)
• Lubrication: Greased roller bearings, inner and outer labyrinth seals.