2003 Terex Pegson 428 Trakpactor Impact Crusher

428 trak
  • MOBILITY : Track
  • ENGINE : Cat C9
  • TYPE : Impactor
  • YEAR MFG : 2003
  • CONDITION : Excellent
  • HOURS: 9168
  • PRICE : $160,000.00
2003 Terex Pegson 428 Trakpactor Impact Crusher
Check out the 2003 Terex Pegson 428 Trakpactor Impact Crusher specifications and features.

This plant is designed for both demolition and quarrying applications. When fitted with manganese blow bars the
crusher will tolerate small quantities of steel reinforcing bar in the feed. However, the machine is not designed to
accept large pieces of steel or other uncrushable objects, and the feed material should be assessed / inspected for
suitability prior to use. It is vitally important that large pieces of steel or similar
uncrushable objects are not allowed to enter the crushing chamber as severe damage and injury may occur.
When High Chrome bars are fitted, no steel should be allowed to enter the chamber, the machine should only be
used on quarry applications, or clean materials such as asphalt.

Crusher type: 428 Fixed Hammer Impactor.
Feed opening: 1067mm x 711mm.
Rotor Width: 1066 mm
Rotor Diameter: 1066 mm (Over Hammers).
Crusher frame: Fabricated from steel plate and
fitted with replaceable liner plates.
Rotor: Runs in two heavy-duty spherical
self aligning roller bearings and is
fitted with four reversible and
replaceable fixed blow bars.

Blowbars: Two full size and two half size
high manganese blow bars are
fitted as standard.
Impact aprons: Fitted in upper and middle
positions and lined with wear
resistant impact plates.
Drive: Through wedge belts with screw
tension adjustment on engine.
Engine pulley: Machines built for stock are fitted
with the standard speed pulley
(suitable for quarry applications).
The slower crusher pulley is
supplied loose.
Maximum feed size: 400mm3 depending on type of
blow bar and material being
Impactor speeds: Slow 504 rpm (224mm diameter)
Std. 630 rpm (280mm diameter)
Lubrication: Greased roller bearings, inner
and outer labyrinth seals.

(For prices refer to your dealer)
• High Chrome hammers. (Only for use when no steel
in feed)
• Grinding path (not suitable for demolition
applications) fitted in the lower position and lined
with wear resistant impact plates on the upper
section, and reversible manganese impact bars on
the lower section. When fitted greater control on the
product size is achieved together with improved
product shape.
• Overband magnetic separator.
• Side/dirt conveyor.
• Radio remote control.

Image Gallery